带齿轮的螺杆主机,工作压力范围从5公斤到15公斤,高效率低噪音,增加了轴承尺寸和无磨损滚动轮廓，寿命周期长,EVO6-G主机，EVO9-G主机，EVO15-G主机,EVO28-G主机，EVO42-G主机，EVO76-G主机，EVO105-G主机
Type型号 | Recommended motor推荐电机 | Max. flow rate在7公斤时最大排气量 |
power min. – max.最小-最大功率 | at 7 barg / 100 psig |
| kW | hp | m³/min | cfm |
EVO3-G | 5.5 - 18.5 | 10-25 | 2.8 | 100 |
EVO6-G | 15 - 37 | 20 - 50 | 5.5 | 200 |
EVO9-G | 22 - 55 | 30 - 75 | 8.4 | 300 |
EVO15-G | 45 - 90 | 60 - 125 | 14.4 | 510 |
EVO28-G | 75 - 160 | 100 - 200 | 26 | 920 |
EVO42-G | 132 - 250 | 175 - 340 | 42 | 1.485 |
EVO76-G | 160 - 540 | 214 - 725 | 76 | 2.678 |
EVO105-G | 250 - 670 | 335 - 900 | 105 | 3.7 |
EVO28-G带齿轮驱动的螺杆空压机主机
功率范围高达160 kW/200 HP
容量高达26 m³/min/920 cfm
压力高达15 barg/220 psig
重量约为323 kg/712 lbs
我们的喷油螺杆空气端EVO28-G是您压缩机系统的心脏。与我们广泛的组件一起使用，您可以以最高的质量标准建造具有最高效率、低噪音的完美压缩机组件。
EVO28-G Air End with Gear
Screw Air Ends with Gear Drive: EVO28-G
Power range up to 160 kW / 200 HP
Capacity up to 26 m³/min / 920 cfm
Pressure up to 15 barg / 220 psig
Weight approx. 323 kg / 712 lbs
Our oil-injected screw air end EVO28-G create the heart of your compressor system. Used with our wide range of components, you can build the perfect compressor package with ultimate efficiency, low noise, at the highest quality standards.
All information at a glance!
Advantages of our new EVO® technology
New ROLLING PROFILE® – ultimate efficiency with reduced noise
Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE®
Wide operating pressure range from 5 to 15 barg
High manufacturer assembling – "Made in Germany"
Quality assurance – bench test of every air end before leaving our factory
Easy application selection with our new ROTORCOMP® SIZING AIR Software
Highest flexibility for your package design
Suitable for all types of motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
沪公网安备 31011602002023号