带齿轮的螺杆主机,工作压力范围从5公斤到15公斤,高效率低噪音,增加了轴承尺寸和无磨损滚动轮廓，寿命周期长,EVO6-G主机，EVO9-G主机，EVO15-G主机,EVO28-G主机，EVO42-G主机，EVO76-G主机，EVO105-G主机
Type型号 | Recommended motor推荐电机 | Max. flow rate在7公斤时最大排气量 |
power min. – max.最小-最大功率 | at 7 barg / 100 psig |
| kW | hp | m³/min | cfm |
EVO3-G | 5.5 - 18.5 | 10-25 | 2.8 | 100 |
EVO6-G | 15 - 37 | 20 - 50 | 5.5 | 200 |
EVO9-G | 22 - 55 | 30 - 75 | 8.4 | 300 |
EVO15-G | 45 - 90 | 60 - 125 | 14.4 | 510 |
EVO28-G | 75 - 160 | 100 - 200 | 26 | 920 |
EVO42-G | 132 - 250 | 175 - 340 | 42 | 1.485 |
EVO76-G | 160 - 540 | 214 - 725 | 76 | 2.678 |
EVO105-G | 250 - 670 | 335 - 900 | 105 | 3.7 |
EVO9-G带齿轮的主机
EVO9-G（水平）
EVO9-G（垂直）
功率范围高达55 kW/75 HP
排气量高达8.4 m³/min/300 cfm
压力高达15 barg/220 psig
重量为93 kg/205 lbs
我们的喷油螺杆空气端EVO9-G是您压缩机系统的心脏。与我们广泛的组件一起使用，您可以以最高的质量标准建造具有最高效率、低噪音的完美压缩机组件。
也可用于垂直齿轮传动。EVO9-G Air End with Gear
EVO9-G (Horizontal)
EVO9-G (Vertical)
Power range up to 55 kW / 75 HP
Capacity up to 8.4 m³/min / 300 cfm
Pressure up to 15 barg / 220 psig
Weight approx. 93 kg / 205 lbs
Our oil-injected screw air end EVO9-G create the heart of your compressor system. Used with our wide range of components, you can build the perfect compressor package with ultimate efficiency, low noise, at the highest quality standards.
Also available with vertical gear drive.
All information at a glance!
Advantages of our new EVO® technology
New ROLLING PROFILE® – ultimate efficiency with reduced noise
Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE®
Wide operating pressure range from 5 to 15 barg
High manufacturer assembling – "Made in Germany"
Quality assurance – bench test of every air end before leaving our factory
Easy application selection with our new ROTORCOMP® SIZING AIR Software
Highest flexibility for your package design
Suitable for all types of motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
沪公网安备 31011602002023号