主营:
节能空压机 ETC无油转换器 罗德康普EVO/EVO-NK系列主机 罗德康普NK/B系列主机 后处理及空压机耗材 免费技术指导选型
紧凑型主机EVO3-NK-G,EVO6-NK-G,EVO9-NK-G,NK200-G,德国rotorcomp,罗德康普主机,罗德康普动力,rotorcomp,rotorcomppower,
型号 | 建议电机功率 kw | 7公斤时最大排气量 m³/min | 压力范围 barg | 净重 kg |
Type | Recommended motor power min.- max. | Max. flow rate at 7 bar | Pressure range min. - max. | Net Weight |
EVO3-NK-G | 7.5 – 18.5 | 2.8 | 5 – 15 | 69 |
EVO6-NK-G | 15 – 37 | 5.5 | 5 – 15 | 135 |
EVO9-NK-G | 22 – 55 | 8.4 | 5 – 15 | 229 |
NK200-G | 45 – 75 | 11.5 | 5 – 15 | 304 |
EVO6-NK-G Screw Air Compact Unit with Gear Drive
EVO6-NK-G带齿轮传动的螺杆式空气压缩主机
Power range up to 37 kW / 50 HP
功率范围高达37 kW/50 HP
Capacity up to 5.5 m³/min / 220 cfm
排气量高达5.5 m³/min/220 cfm
Pressure up to 15 barg / 220 psig
压力高达15 barg/220 psig
Weight approx. 124 kg / 273 lbs
重量约为124 kg/273 lbs
Our unique series of NK compact units are oil-injected screw compressor modules that integrate the main parts of a compressor system. This solution is the best possible way to build a reliable, compact and cost efficient complete compressor package with ultimate efficiency, low noise and the highest quality standards.
Our EVO-NK-G compact unit is an oil-injected screw compressor module that integrate the main parts of a compressor system and provide optimum operation reliability and reduced design costs for your compressor package.
The following components are integrated into each compact unit: EVO® oil-injected air end with ROLLING PROFILE®, intake valve with control unit and air filter, oil reservoir and oil separation system with coalescing cartridge(s), oil filter and oil thermostat valve, minimum pressure valve and non return valve.
Various options are also available, such as safety valve, oil level sight glass and maintenance indicators.
Advantages of our new EVO® technology
New ROLLING PROFILE® – ultimate efficiency with reduced noise
Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE®
Wide operating pressure range from 5 to 15 barg
High manufacturer assembling – "Made in Germany"
Quality assurance – bench test of every air end before leaving our factory
Easy application selection with our new ROTORCOMP® SIZING AIR Software
Highest flexibility for your package design
Suitable for all types of motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
独特的NK紧凑型机组系列是喷油螺杆压缩机模块,集成了压缩机系统的主要部件。该解决方案是构建可靠、紧凑、经济高效的完整压缩机组件的最佳方式,具有最高的效率、低噪音和最高的质量标准。
EVO-NK-G紧凑型机组是一种喷油螺杆压缩机模块,它集成了压缩机系统的主要部件,为您的压缩机组件提供最佳的运行可靠性和降低的设计成本。
以下部件集成到每个紧凑型装置中:带滚动剖面®的EVO®喷油空气端、带控制单元和空气滤清器的进气阀、带凝聚筒的储油器和油分离系统、油滤清器和油恒温器阀、最小压力阀和止回阀。
还提供各种选项,如安全阀、油位观察窗和维护指示器。
我们新EVO®技术的优势
全新滚动型材®–降低噪音的终极效率
由于轴承尺寸增加和无磨损滚动型材®,寿命周期长
工作压力范围宽,从5 barg到15 barg
高制造商组装-“德国制造”
质量保证-出厂前对每个空气端进行台架试验
使用我们新的ROTORCOMP®Size AIR软件,轻松选择应用程序
为您的包装设计提供最高的灵活性
适用于所有类型的电机
驱动选项:皮带驱动、直接驱动、内部齿轮驱动
底座和端面法兰安装
更多请与我们联系
禾必斯特压缩机(上海)有限公司 地址:上海市金山区 咨询电话:021-64130070 13916285293 13918092362 邮箱:sales@rotorcomp.cn.com
ROTORCOMP 沪ICP备16032550号-1Copyright © 2016 www.rotorcomp.cn.com All rights reserved上海禾必机械设备有限公司 版权所有 未经许可 严禁复制